Ruijie Networks RG-S2600E Series Cli Reference Manual page 601

S2600E CLI Reference Guide
Default N/A.
Command
mode Privileged mode.
Usage
guidelines N/A.
The following example shows the information about the
802.1x authentication user:
Ruijie# show dot1x user id 1
User name: caikov
id: 1
Type: static
Mac address is 0013.2049.8272
Vlan id is 217
Access from port Gi0/13
User ip address is 192.168.217.64
Max user number on this port is 6000
Examples
COS on this port is 5
Up-bandwidth is 1024 kbps
Down-bandwidth is 1024 kbps
Authorization vlan is dep7
Authorization seesion time is 1000000 seconds
Authorization ip address is 192.168.217.64
Start accounting
Permit proxy user
Permit dial user
IP privilige is 2
Ruijie#
Related Command
commands
dot1x auth-mode
dot1x max-req
dot1x
port-control auto
dot1x
reauth-max
dot1x
Chapter 4 802.1X Configuration Commands
Description
Set the 802.1x authentication mode.
Set the maximum number of
authentication request
retransmissions.
Set the port to participate in
authentication.
Set the maximum number of the
supplicant re-authentications.
Set the re-authentication attribute.