Ruijie Networks RG-S2600E Series Cli Reference Manual page 959

S2600E CLI Reference Guide
Default
Command
mode
Usage
guidelines
Examples
Related
commands
1.1.7 mac-aadress-table move update receive vlan
Use this command to configure the VLANs processing MAC address update
packets.
mac-address-table move update receive vlan vlan-range
no mac-address-table move update receive vlan vlan-range
Parameter
description
Default
Command
mode
Usage
guidelines
Chapter 1 REUP Configuration Commands
Disabled.
Global configuration mode.
The dual link backup switchover will lead to the loss of
downstream data flow, for the MAC address for the uplink
switch has not been updated in time. Therefore, it is
necessary to update the MAC address table of the uplink
switch, to reduce the loss of L2 data flow. You need to
enable the switch of receiving the MAC address update
messages on the uplink switch.
Ruijie(config)# mac-address-table move update receive
Command
mac-address-table
move update
transit
Parameter Description
Range of the VLANs processing MAC
vlan-range
address update packets.
All VLANs process MAC address update packets.
Global configuration mode.
This command can be used to disable some VLANs from
processing MAC address update packets. VLANs disabled
Description
Enable REUP to
mac-address-table
messages.
transmit the
update