Ruijie Networks RG-S2600E Series Cli Reference Manual page 728

S2600E CLI Reference Guide
guidelines
Examples
Related
commands
10.3.2 show ip dhcp snooping
binding
Use this command to view the information of the DHCP snooping binding database.
show ip dhcp snooping binding
Command
mode
Usage
Chapter 10 DHCP Snooping Configuration Commands
Show the information of DHCP Snooping.
Ruijie# show ip dhcp snooping
Switch DHCP snooping status ：ENABLE
Verification of hwaddr field status ：DISABLE
DHCP snooping database write-delay time: 0 seconds
DHCP snooping option 82 status: ENABLE
DHCP snooping Support Bootp bind status: ENABLE
Interface
------------------------
Command
ip dhcp snooping
ip dhcp snooping
verify mac-address
ip dhcp snooping
write-delay
ip dhcp snooping
information option
ip dhcp snoooping
bootp-bind
ip dhcp snooping
trust
Privileged EXEC mode.
N/A.
Trusted Rate limit (pps)
------- ------------
Description
Enable the DHCP snooping
globally.
Enable the check of source
MAC address of
Snooping packets.
Set the interval of writing user
information to
periodically.
Add option82 to the DHCP
request message.
Enable the DHCP snooping
bootp bind function.
Set the port as a trust port.
DHCP
FLASH