Preface
Version Description
This manual matches the software version RGOS
Target Readers
This manual is intended for the following readers:
Network engineers
Technical salespersons
Network administrators
Conventions in this Document
1. Universal Format Convention
Arial: Arial with the point size 10 is used for the body.
Note: A line is added respectively above and below the prompts such as caution
and note to separate them from the body.
Format of information displayed on the terminal: Courier New, point size 8,
indicating the screen output. User's entries among the information shall be
indicated with bolded characters.
2. Command Line Format Convention
Arial is used as the font for the command line. The meanings of specific formats
are described below:
Bold: Key words in the command line, which shall be entered exactly as they
are displayed, shall be indicated with bolded characters.
Italic: Parameters in the command line, which must be replaced with actual
values, shall be indicated with italic characters.
[ ]: The part enclosed with [ ] means optional in the command.
{ x | y | ... }: It means one shall be selected among two or more options.
[ x | y | ... ]: It means one or none shall be selected among two or more options.
//:Lines starting with an exclamation mark "//" are annotated.
3. Signs
Various striking identifiers are adopted in this manual to indicate the matters
that special attention should be paid in the operation, as detailed below:
®
10.4(3)p1.
3
Need help?
Do you have a question about the RG-S2600E Series and is the answer not in the manual?
Questions and answers