S2600E/P CLI Reference Guide
Default
configuration
Command
mode
Examples
Related
commands
10.1.13 spanning-tree pathcost method
Use this command to configure the path cost of the port. Use the no form of the
command to restore it to the default setting.
spanning-tree pathcost method [long [standard] | short]
no spanning-tree pathcost method
Parameter
description
Default
configuration
Command
mode
Examples
Related
Chapter 10 MSTP Configuration Commands
The default value is 3.
Global configuration mode.
Ruijie(config)# spanning-tree tx-hold-count 5
Command
show spanning-tree
Parameter
Long [standard]
short
Adopt the 802.1T standard to set path cost by default.
Global configuration mode.
Ruijie(config-if)# spanning-tree pathcost method long
Command
Description
Show
the
global
configuration.
Description
Adopt
the
802.1t
configure path cost.
The standard indicates that use the
expression recommended by the
standard to calculate the cost value.
Adopt
the
802.1d
configure path cost.
Description
MSTP
standard
to
standard
to
Need help?
Do you have a question about the RG-S2600E Series and is the answer not in the manual?