Switch Management - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E/P CLI Reference Guide
Commands
2
2.1 User Management
Related Commands
2.1.1
To exit from privileged user mode to normal user mode or lower the privilege
level, execute the privileged user command disable .
disable [ privilege-level ]
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands

Switch Management

Configuration Commands
disable
Parameter
privilege-level
Privileged mode.
Use this command to return to user mode from privileged
mode. If a privilege level is added, the current privilege
level will be lowered to the specified level.
Note
The example below lowers the current privilege level of the
device down to level 10:
Ruijie# disable 10
Command
enable
Chapter 2 Switch Management Configuration
Description
Privilege level
The privilege level following the disable
command must be lower than the current
level.
Description
From user mode enter to the
privileged mode or log on the
higher level of authority.