Ruijie Networks RG-S2600E Series Cli Reference Manual page 801

S2600E CLI Reference Guide
Command
mode
Usage
guidelines
Examples
Related
commands
15.3.10 nfpp dhcp-guard policy
Use this command to set the rate-limit threshold and the attack threshold.
nfpp dhcp-guard policy { per-src-mac | per-port} rate-limit-pps attack-threshold-pps
Parameter
description
Default
Settings
Chapter 15 NFPP Configuration Commands
Interface configuration mode.
N/A
Ruijie(config)# interface G0/1
Ruijie(config-if)# nfpp dhcp-guard isolate-period 180
Command
dhcp-guard
isolate-period
show nfpp
dhcp-guard
summary
Parameter
per-src-mac
per-port
rate-limit-pps
attack-threshold-pps
By default, the rate-limit threshold and the attack threshold
are not configured.
Description
Set the global isolate period.
Show the configurations.
Description
Set the rate-limit threshold and the
attack threshold for each source
MAC address.
Set the rate-limit threshold and the
attack threshold for each port.
Set the rate-limit threshold with the
valid range of [1, 9999].
Set the attack threshold with the
valid range of [1, 9999].