Ruijie Networks RG-S2600E Series Cli Reference Manual page 303

S2600E/P CLI Reference Guide
Related
commands
4.2 Showing and Monitoring Commands
4.2.1 debug ip dhcp client
Use this command to carry out the DHCP client debugging in the privileged user
mode:
debug ip dhcp client
no debug ip dhcp client
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
4.2.2 show dhcp lease
Use this command to show the lease information of the IP address obtained by
the DHCP client.
show dhcp lease
Chapter 4 DHCP Configuration Commands
interface fastEthernet 0
ip address dhcp
Command Description
dns-server Define the DNS server of DHCP client.
Define the name of the DHCP address
ip dhcp pool pool and enter into the DHCP address
pool configuration mode.
N/A.
Disabled.
Privileged mode.
This command is used to show the main message content
of the DHCP client during the interaction of the servers and
the processing status.
The example below turns on the debugging switch of the
DHCP client in the equipment.
debug ip dhcp client