Ruijie Networks RG-S2600E Series Cli Reference Manual page 306

S2600E/P CLI Reference Guide
Platform
description
5.1.2 ip dhcp relay information option dot1x
Use this command to enable the dhcp option dot1x function.. The no form of
the command is used to disable the dhcp option dot1x function.
[no] ip dhcp relay information option dot1x
Default
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
5.1.3 ip dhcp relay information option dot1x access-group
Use this command to configure the dhcp option dot1x acl. The no form of this
command is used to disable the dhcp option dot1x acl.
[no] ip dhcp relay information option dot1x access-group acl-name
Default
Chapter 5 DHCP Relay Configuration Commands
This command is only supported by the switches.
Disabled.
Global configuration mode.
It is necessary to enable the DHCP Relay, and combine
with the 802.1x related configuration to configure this
command.
The following example enables the DHCP option dot1x
function on the device.
Ruijie# configure terminal
Ruijie(config)# ip dhcp relay information option dot1x
Command
service dhcp
ip dhcp relay
information
option dot1x
access-group
-
No ACL is associated with.
Description
Enable the DHCP Relay.
Configure the option dot1x acl.