Ruijie Networks RG-S2600E Series Cli Reference Manual page 532

S2600E CLI Reference Guide
radius-server
retransmit
radius-server
timeout
2.1.5 radius-server retransmit
Use this command to configure the number of packet retransmissions before the device
considers that the RADIUS security server does not respond. The no form of this command is
used to restore it to the default setting.
radius-server retransmit retries
no radius-server retransmit
Parameter
Parameter
description
retries
Default The default number of retransmissions is 3.
Command
mode Global configuration mode.
AAA uses the next method to authenticate users only
when the current security server for authentication does
not respond. When the device retransmits the RADIUS
Usage
packet for the specified times and the interval between
guidelines
every two retries is timeout, the device considers that the
security sever does not respond.
The following example sets the number of retransmissions
Examples
to 4:
Ruijie(config)# radius-server retransmit 4
Command
radius-server
host
Related
radius-server
commands
key
radius-server
timeout
Chapter 2 RADIUS Configuration Commands
Define the number of RADIUS packet
retransmissions.
Define the timeout for the RADIUS
packet.
Description
Number of retransmissions
Description
Define the RADIUS security server.
Define a shared password for the
RADIUS server.
Define the timeout for the RADIUS
packet.