Ruijie Networks RG-S2600E Series Cli Reference Manual page 209

S2600E/P CLI Reference Guide
Command
mode
Examples
Related
commands
10.2.3 show spanning-tree mst
In privileged EXEC mode, use this command to display the information of MST
and instances.
show spanning-tree mst {configuration |instance-id [ interface interface-id ] }
Parameter
description
Default
configuration
Command
mode
Examples
Chapter 10 MSTP Configuration Commands
Show the status of portfast.
portfast
Show the status of BPDU guard.
bpduguard
Show the link type of an interface.
link-type
Privileged EXEC mode.
Ruijie# show spanning-tree interface gigabitethernet
1/5
Command Description
Enable the BPDU filter feature
spanning-tree
someone the interface.
bpdufilter
spanning-tree
Enable the portfast on the interface.
portfast
Enable the BPDU guard on the
spanning-tree
interface.
bpduguard
Set the link type of the interface to
spanning-tree
point-to-point.
link-type
Parameter Description
The
configuration
equipment.
Instance number
instance-id
Interface number
interface-id
All the instances are displayed by default.
Privileged mode.
Ruijie# show spanning-tree mst configuration
MST configuration of the