Ruijie Networks RG-S2600E Series Cli Reference Manual page 968

S2600E CLI Reference Guide
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
2.1.4 rldp port
Use this command to enable RLDP on the port and specify detection type and
troubleshooting method. Use the no form of this command to disable the
function.
rldp port {unidirection-detect | bidirection-detect | loop-detect } {warning |
shutdown-svi | shutdown-port | block}
no rldp port { unidirection-detect | bidirection-detect | loop-detect }
Parameter
description
Chapter 2 RLDP Configuration Command
Parameter Description
num Maximum number of detections in the
range 2 to 10
2.
Global configuration mode.
This command is used together with the detection interval
to specify the maximum number of detections.
The following example shows how to set the maximum
number of detections as 5:
Ruijie(config)# rldp detect-max 5
Command Description
rldp
Set the detection interval.
detect-interval
Parameter
unidirection-detect
bidirection-detect
loop-detect
warning
shutdown-svi
Description
Set unidirectional link detection.
Set bidirectional link detection.
Set loop detection type.
Warn the user.
Shutdown the SVI the port belongs
to.