Ruijie Networks RG-S2600E Series Cli Reference Manual page 206

S2600E/P CLI Reference Guide
10.1.27 bpdu src-mac-check
Use this command to enable the BPDU source MAC address check function on
the interface. Use the no form of this command to disable the function.
bpdu src-mac-check H.H.H
no bpdu src-mac-check
Parameter
description
Default
configuration
Command
mode
Examples
10.1.28 clear spanning-tree detected-protocols
Use this command to force the interface to send the RSTP BPDU message and
check the BPDU messages.
clear spanning-tree detected-protocols [interface interface-id]
Parameter
description
Default
configuration
Command
mode
Chapter 10 MSTP Configuration Commands
show spanning-tree
interface
Parameter Description
Indicate
messages from this MAC address are
H.H.H
received.
Indicate that the BPDU messages
no
from any MAC address are received.
Disabled.
Interface configuration mode.
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# bpdu src-mac-check 00d0.f800.1e2f
Parameter
interface-id
N/A.
Privileged configuration mode.
Show the STP configuration
information of the interface.
that only the
Description
ID of the interface
BPDU