Ruijie Networks RG-S2600E Series Cli Reference Manual page 87

S2600E/P CLI Reference Guide
Examples
Related
commands
1.1.5 duplex
Use the duplex command in the interface configuration mode to specify the
duplex mode for the interface. Use the no form of the command to restore it to
the default setting.
duplex {auto | full | half}
no duplex
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
1.1.6 flowcontrol
Use this command to enable or disable the flow control. Use the no form of the
command to restore it to the default setting.
Chapter 1 Interface Configuration Commands
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# description GBIC-1
Command Description
Show the interface information.
show interfaces
Parameter Description
Self-adaptive full duplex and half duplex
auto
Full duplex
full
Half duplex
half
Auto.
Interface configuration mode.
The duplex mode is associated with the interface type.
Use show interfaces to display the duplex mode of the
interface
Ruijie(config-if)# duplex full
Command Description
show
Show the interface information.
interfaces