Ruijie Networks RG-S2600E Series Cli Reference Manual page 538

S2600E CLI Reference Guide
cos
2.1.10 radius set qos cos
Use this command to set the qos value sent by the RADIUS server as the cos value of the
interface. Use the no form of this command to restore it to the default setting.
radius set qos cos
no radius set qos cos
Parameter
description N/A.
Set the qos value sent by the RADIUS server as the dscp
Default
value.
Command
mode Global configuration mode.
Usage Set the qos value sent by the RADIUS server as the cos
guidelines value, and the dscp value by default.
The following example sets the qos value sent by the
Examples
RADIUS server as the cos value of the interface.:
Ruijie(config)# radius set qos cos
Command
Related
radius
commands
vendor-specific
extend
2.1.11 radius vendor-specific
extend
Use this command to extend RADIUS not to differentiate the IDs of private vendors. Use the
no form of this command to disable the function.
radius vendor-specific extend
no radius vendor-specific extend
Chapter 2 RADIUS Configuration Commands
server as the cos value of the interface.
Description
Extend
differentiate the IDs of private
vendors.
RADIUS not to