Ruijie Networks RG-S2600E Series Cli Reference Manual page 762

S2600E CLI Reference Guide
Command
mode
Usage
guidelines
Examples
Platform
description
13.1.13 ipv6 dhcp snooping vlan
vlan-id information option
format-type interface-id string
Use this command to enable the function of adding the option18 into the DHCP request
packets and filling the option18 interface-id with the content being the user-defined (the
storage format is ASCII) and performing the packet forwarding. The no form of this command
will disable this function.
[no] ipv6 dhcp snooping vlan vlan-id information option format-type interface-id string
ascii-string
Parameter
description
Default
Chapter 13 DHCPv6 Snooping Configuration Commands
Interface configuration mode.
With this command enabled, the option18 interface-id will
be added into the DHCPv6 request packets and the VLAN
will be changed to the specified one and the DHCP server
will assign the addresses according to the optionq8
information.
The following example adds the option18 interface-id into
the DHCPv6 request packets and changes the VLAN4094
in the option to VLAN4093.
Ruijie# configure terminal
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)#
information option change-vlan-to vlan 4093
Ruijie(config-if)# end
This command is supported on all switches.
Parameter
vlan-id
ascii-string
Disabled..
ipv6 dhcp snooping
Description
The VLAN where the DHCPv6
request packets are.
User-defined content for filling the
interface-id.
vlan 4094