S2600E/P CLI Reference Guide
Commands
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
2.2.11
show mac-address-table static
Use this command to show the static MAC address.
show mac-address-table static [addr mac-addr] [interface interface-id] [vlan
vlan-id ]
Parameter
description
Chapter 2 MAC Address Configuration
Parameter
interface interface-id
history
The MAC address notification configuration is shown by
default.
Privileged mode.
Ruijie# show mac-address-table notification interface
Interface
MAC Added Trap MAC Removed Trap
---------
--------------
GigabitEthernet1/14
Ruijie# show mac-address-table notification
MAC Notification Feature: Disabled
Interval between Notification Traps: 1 secs
Maximum Number of entries configured in History Table:1
Current History Table Length: 0
Ruijie# show mac-address-table notification history
History Index: 0
MAC Changed Message:
Operation:ADD Vlan: 1 MAC Addr: 00f8.d012.3456
GigabitEthernet 3/1
Command
mac-address-table
notification
snmp trap
mac-notification
Parameter
mac-addr
Description
Interface ID. Show the MAC
address
configuration on the interface.
Show
the
MAC
notification history.
--------------
Disabled
Disabled
Description
Enable
MAC
notification.
Enable the MAC address
trap notification function on
the specified interface.
Description
Destination MAC address of the
notification
address
address
Need help?
Do you have a question about the RG-S2600E Series and is the answer not in the manual?