Ruijie Networks RG-S2600E Series Cli Reference Manual page 465

S2600E/P CLI Reference Guide
2.1.13 ipv6 mld snoopin s pp
Use this command to enable the mld snooping suppression in the global
c onfigurat
i pv6 mld sn
no ipv6 mld snooping suppression enable
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
2.1.14 ipv6 mld source-chec
T he source-ch
mrouter interface. Use this command to enable the mld source-check port in the
global configuration mode. Use the no form of this command to disable this
function.
i pv6 mld sn
no ipv6 mld snooping source-check port
g u ression enable
ion mode. Use the no form of this command to disable this function.
ooping suppression enable
Parameter
-
N/A
Global config
With the IPv6 MLD snooping suppression function
enabled, within the query interval, the layer-2 device will
only forward the first received MLD Report packet in an
IPv6 multicast group to the layer-3 device, but not the
other MLD Report packets in the same IPv6 multicas
group, reducing the packet number in the network.
This co mmand is used to enable the IPv6 MLD snooping
suppression, and only the MLDv1 Report packets are
suppressed rather than the MLDv2 Report packets.
The following example shows how to enable mld snooping
suppression:
Ruijie(config-if)# ipv6 mld snooping suppression
k port
ec p k ort is used to allow
ooping source-check port
Chapter 2 MLD Snooping Commands
Description
-
uration mode.
the multica st flow to enter through the
t