Ruijie Networks RG-S2600E Series Cli Reference Manual page 25

S2600E/P CLI Reference Guide
Commands
Usage
guidelines
Examples
Related
commands
2.1.16
To configure the password for line logonexecute the line configuration command
password. The no form of this command is used to delete the line logon
password.
password {password | [0|7] encrypted-password}
no password
Parameter
description
Command
mode
Usage
guidelines
Examples
If the AAA security server is not enabled, this command is
used for the local user authentication at logon. The user
here means the one configured with the username
command.
The example below shows how to set the local user
authentication on VTY.
Ruijie(config)# no aaa new-model
Ruijie(config)# username test password 0 test
Ruijie(config)# line vty 0
Ruijie(config-line)# login local
Command
username
password
Parameter
password
0|7
encrypted-password
Line configuration mode.
This command is used to configure the authentication
password for the line logon of remote user.
The example below configures the line logon password as
"red":
Ruijie(config)# line vty 0
Ruijie(config-line)# password red
Chapter 2 Switch Management Configuration
Description
Configure the local user information.
Description
Password for line of remote user
Password encryption type, "0" for
no encryption,
encryption
Password text
"7" for simple