Ruijie Networks RG-S2600E Series Cli Reference Manual page 420

S2600E/P CLI Reference Guide
Usage
guidelines
Examples
Related
commands
1.1.5 ip i gmp snooping filter
To configure a port to receive a specific set of multicast streams, execute the ip
igmp snooping filter comm
associate the port to a specific profile. The
delete the associated profi
ip igmp snooping filter profile-number
no ip igmp snooping filter profile-number
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Chapter 1 IGMP Snooping Commands
After you execute this command to enable the fast-leave
function, the system will remove
multicast group on the corresponding interface upon the
receipt of the IGMP leave message.
The following example shows how to enable the
function on the switch:
Ruijie(config)# ip igmp snooping fast-leave
Command
N/ A
and in the interface configuration mode to
le.
Parameter Description
profile-nu mber Profile number
N/A.
Interface configuration mode.
A specific profile must be created before association.
The following example demonstrates how to
profile 1 to a megabit port 0/1:
Ruijie(config)# interface fastEthernet 0/1
Ruijie(confi g-if) # ip igmp sno
the corresponding
Function
no form of this command is used to
oping filter 1
fast leave
associate