Ruijie Networks RG-S2600E Series Cli Reference Manual page 698

S2600E CLI Reference Guide
8.1.2 cpu-protect type packet-type
pri pri_num
Use this command to set the priority for the specified type of packets the CPU port receives.
cpu-protect type { arp | bpdu | dhcp | ipv6mc | igmp | rip | ospf | vrrp | pim | ttl1 |
unknown-ipmc | dvmrp|... } pri pri_num
Parameter
description
Default
Command
mode
Examples
Related
commands
8.2 Showing Related
Commands
8.2.1 show cpu-protect mboard
Use this command to show the statistics of various packets of CPU protection on the
management board.
show cpu-protect mboard
Command
mode
Usage
Chapter 8 CPU Protection Configuration Commands
Parameter
pri_num
The default is 0 for various types of packets.
Global configuration mode.
The following example sets the priority of the BPDU
packets as 7:
Ruijie(config)# cpu-protect type bpdu pri 7
Set packet type bpdu pri 7.
Command
cpu-protect type
packet-type
pps pps_value
Privileged EXEC mode.
This command shows the statistics of the packets received
Description
Packet priority in the range 0 to 7
Description
Set the bandwidth for the CPU to
receive the specified type of
packets.