Ruijie Networks RG-S2600E Series Cli Reference Manual page 821

S2600E CLI Reference Guide
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
Chapter 15 NFPP Configuration Commands
Parameter
per-src-ip
per-port
rate-limit-pps
attack-threshold-pps
By default, the rate-limit threshold and the attack threshold
are not configured.
Interface configuration mode.
The attack threshold value shall be equal to or greater
than the rate-limit threshold.
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp icmp-guard policy per-src-ip 5 10
Ruijie(config-if)# nfpp icmp-guard policy per-port 100
200
Command
icmp-guard
attack-threshold
icmp-guard
rate-limit
show nfpp
icmp-guard
summary
show nfpp
icmp-guard hosts
Description
Set the rate-limit threshold and the
attack threshold for each source IP
address.
Set the rate-limit threshold and the
attack threshold for each port.
Set the rate-limit threshold with the
valid range of [1, 9999].
Set the attack threshold with the
valid range of [1, 9999].
Description
Set the global attack threshold.
Set the global rate-limit threshold.
Show the configurations.
Show the monitored host.