Debug Radius - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
Parameter
description N/A.
Default Only the private vendor IDs of Ruijie are recognized.
Command
mode Global configuration mode.
Usage Use this command to identify the attributes of all vendor
IDs by type.
guidelines
The following example extends RADIUS not to differentiate
Examples
the IDs of private vendors:
Ruijie(config)# radius vendor-specific extend
Command
radius
Related
attribute
commands
radius set qos
cos
2.2 Showing Related
Commands
2.2.1

debug radius

Use this command to turn on the RADIUS debugging switch. The no form of this command is
used to turn off the RADIUS debugging switch.
debug radius {event | detail}
no debug radius {event | detail}
Parameter
Description N/A.
Command
mode Privileged EXEC configuration mode.
Chapter 2 RADIUS Configuration Commands
Description
Configure vendor type.
Set the qos value sent by the RADIUS
server as the cos value of the interface.