Ruijie Networks RG-S2600E Series Cli Reference Manual page 841

S2600E CLI Reference Guide
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
15.8.4 logging
Use this command to set the VLAN or the interface log for NFPP.
logging vlan vlan-range
logging interface interface-id
Parameter
description
Default
Settings
Chapter 15 NFPP Configuration Commands
By default, the number_of_message is 1 and the
length_in_seconds is 30.
NFPP configuration mode.
N/A
Ruijie(config)# nfpp
Ruijie(config-nfpp)# log-buffer logs 2 interval 12
Command
log-buffer entries number
show nfpp log summary
Parameter Description
Set the specified VLAN range, in the
vlan-range
format such as "1-3, 5".
interface-id Set the interface ID.
All logs are recorded..
rate of syslog generated from the
NFPP log buffer area.
Description
Set the NFPP log buffer
area size.
Show the
configurations or the log
buffer area.
NFPP log