Ruijie Networks RG-S2600E Series Cli Reference Manual page 208

S2600E/P CLI Reference Guide
Command
mode
Examples
Related
commands
10.2.2 show spanning-tree interface
Use this command to show the STP configuration of the interface, including the
optional spanning tree.
show spanning-tree interface interface-id [{bpdufilter | portfast | bpduguard
| link-type } ]
Parameter
description
Chapter 10 MSTP Configuration Commands
inconsistentports
forward-time
hello-time
max-age
max-hops
tx-hold-count
pathcost method
Privileged EXEC mode.
Ruijie# show spanning-tree hello-time
Command
spanning-tree
pathcost method
spanning-tree
forward-time
spanning-tree
hello-time
spanning-tree
max-age
spanning-tree
max-hops
spanning-tree
tx-hold-count
Parameter Description
Interface ID
interface-id
Show the status of BPDU filter.
bpdufilter
Show the block port due to root
guard or loop guard.
Show BridgeForwardDelay.
Show BridgeHelloTime.
Show BridgeMaxAge.
Show the maximum hops of an
instance.
Show TxHoldCount.
Show the method
calculating path cost.
Description
Set the pathcost method.
Set BridgeForwardDelay.
Set BridgeHelloTime.
Set BridgeMaxAge.
Set the maximum hops of an
instance.
Show TxHoldCount.
used for