Table of Contents
Advertisement
S2600E/P CLI Reference Guide
3
3.1
Configuration Related Commands
3.1.1
ipv6 address
Use this command to configure an IPv6 address for a network interface. Use
the no form of this command to delete the configured address.
ipv6 address ipv6-address/prefix-length
ipv6 address ipv6-prefix/prefix-length eui-64
ipv6 address prefix-name sub-bits/prefix-length [eui-64]
no ipv6 address
no ipv6 address ipv6-address/prefix-length
no ipv6 address ipv6-prefix/prefix-length eui-64
no ipv6 address prefix-name sub-bits/prefix-length [eui-64]
Parameter
description
Chapter 3 IPv6 Configuration Commands
IPv6
Commands
Parameter
ipv6-prefix
ipv6-address
prefix-length
Configuration
Description
IPv6 address prefix in the format
defined in RFC4291. The address
shall be in hex; the fields in the
address shall be separated by
comma, and each field shall contain
16 bits.
IPv6 address in the format defined
in RFC4291. The address shall be
in hex; the fields in the address shall
be separated by comma, and each
field shall contain 16 bits.
Length of the IPv6 prefix, the
network
address
of
address.
the
IPv6
Advertisement
Table of Contents
Need help?
Do you have a question about the RG-S2600E Series and is the answer not in the manual?
Questions and answers