Ruijie Networks RG-S2600E Series Cli Reference Manual page 29

S2600E/P CLI Reference Guide
Commands
Usage
guidelin
es
Examples
Related
commands
2.2 Basic System
Management Related
Commands
2.2.1
To configure the login banner, execute the banner login command in the global
configuration mode. You can use the no banner login command to remove the
configuration.
banner login c message c
Parameter
description
Command
mode
This command is used to establish local user database for the
purpose of authentication.
Note
The example below configures a username and password
and bind the user to level 15.
Ruijie(config)# username test privilege 15 password 0 pw15
Command
login local
banner login
Parameter
c
message
Global configuration mode.
Chapter 2 Switch Management Configuration
If the type of encryption is specified as 7, the length of
the entered legal cipher text should be even.
In general, it is not necessary to specify the type of
encryption as 7.
Commonly, it is necessary to specify the type of
encryption as 7 only when the encrypted password is
copied and pasted.
Description
Enable local authentication
Description
Separator of the message of logging
banner. Delimiters are not allowed in
the MOTD.
Contents of login banner