Ruijie Networks RG-S2600E Series Cli Reference Manual page 443

S2600E/P CLI Reference Guide
1.1.30 ip igmp snooping vlan static interface
Once IGMP snooping is enabled, a port can receive a certain multicast frame
without being afftected by various IGMP messges by executing the ip igmp
snooping vlan static interface command in the global configuration mode.
The no form of this command is used to delete a static configuration.
ip igmp snooping vlan vid static ip-addr interface interface-id
no ip igmp snooping vlan vid static ip-addr interface interface-id
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
1.1.31 permit
To permit the forwarding of the multicast streams in the range specified by the
profile, execute the permit command in the profile configuration mode. In this
way, the interface associated with this profile will forward the specified multicast
stream only.
permit
Chapter 1 IGMP Snooping Commands
Parameter
vid
ip-addr
interface-id
N/A.
Global configuration mode.
Multiple multicast IP addresses can be configured for an
interface.
The following example demonstrates how to configure a
static multicast address on a port:
Ruijie(config)# ip igmp snooping vlan 1 static 224.0.0.2
interface fastEthernet 0/1
Command
ip igmp snooping vlan
mdevice interface
Description
VLAN ID of a routing interface
Multicast IP address
Interface ID
Description
Configure a multicast routing
interface