S2600E CLI Reference Guide
[no] switchport port-security binding interface interface-id
ipv4-address | ipv6-address
[no] switchport port-security binding interface interface-id ipv4-address | ipv6-address
Parameter
interface-id
mac-address
Parameter
description
Vlan_id
ipv4-address
ipv6-address
Default
configuration
N/A
Command
mode
Privileged mode.
Usage
N/A
guidelines
1.This example shows how to bind the IP address 192.168.1.100 on
the interface g 0/10:
Ruijie(config)# switchport port-security binding interface
g 0/10 192.168.1.100
Examples
2.This example shows how to bind the IP address
192.168.1.100 and MAC address 00d0.f800.5555 with vlan id
1 on the interface g 0/10
Ruijie(config)# switchport port-security binding interface
g 0/10 00d0.f800.5555 vlan 1 192.168.1.100
Command
Related
commands
show port-security
switchport
port-security
switchport
port-security
binding
Chapter 7 Port-based Flow Control Configuration Commands
Description
nterface ID
Binding source MAC address
Vlan ID of the binding source MAC
addess
Binding ipv4 adderess
Binding ipv6 address
Description
Show port security settings.
Enable the port-security.
Configure the secure address binding
in the interface configuration mode.
mac-address vlan vlan_id
Need help?
Do you have a question about the RG-S2600E Series and is the answer not in the manual?