Ruijie Networks RG-S2600E Series Cli Reference Manual page 488

S2600E CLI Reference Guide
1.2.4 aaa authorization exec
Use this command to authorize the users logged in the NAS CLI and assign the authority level.
The no form of this command is used to disable the aaa authorization exec function.
aaa authorization exec {default | list-name} method1 [method2...]
no aaa authorization exec {default | list-name}
Parameter
default
list-name
Parameter
description
method
Default Disabled.
Command
mode Global configuration mode.
RGOS supports authorization of users logged in the NAS
CLI and assignment of CLI authority level(0-15). The aaa
authorization exec function is effective on condition that
Login authentication function has been enabled. It can not
Usage
enter the CLI if it fails to enable the aaa authorization exec.
guidelines
You must apply the exec authorization method to the
terminal line; otherwise the configured method is
ineffective.
The following example uses the RADIUS server to
Examples
authorize Exec:
Chapter 1 AAA Configuration Commands
Description
When this parameter is used, the following defined
method list is used as the default method for Exec
authorization.
Name of the user authorization method list, which could
be any character strings.
It must be one of the keywords listed in the following
table. One method list can contain up to four methods.
Keyword Description
Use the local user name database for
local
authorization.
none Do not perform authorization.
Use the server group for authorization. At
group
present, the RADIUS server group is
supported.