Ruijie Networks RG-S2600E Series Cli Reference Manual page 23

S2600E/P CLI Reference Guide
Commands
2.1.13
In case the AAA is disabled, to enable simple logon password authentication on
the interface, execute the interface configuration command login. The no form
of this command is used to delete the line logon password authentication.
login
no login
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
2.1.14
In case the AAA is enabled, the authentication with the AAA server must be
performed for logon. Use this command to associate logon authentication
method list. The no form of this command is used to delete the logon
authentication method list.
login authentication {default | list-name}
no login authentication {default | list-name}
login
N/A.
Line configuration mode.
If the AAA security server is not enabled, this command is
used for the simple password authentication at logon. The
password here is the one configured for VTY or console
interface.
The example below shows how to set the logon password
authentication on VTY.
Ruijie(config)# no aaa new-model
Ruijie(config)# line vty 0
Ruijie(config-line)# password 0 normatest
Ruijie(config-line)# login
Command
password
login
authenticatio
n
Chapter 2 Switch Management Configuration
Description
Configure the line logon password