Ruijie Networks RG-S2600E Series Cli Reference Manual page 281

S2600E/P CLI Reference Guide
Related
commands
3.1.17 ipv6 nd suppress-ra
Use this command to disable the interface from sending the RA message. Use
the no form of this command to enable the function.
ipv6 nd suppress-ra
no ipv6 nd suppress-ra
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
3.1.18 ipv6 ns-linklocal-src
Use this command to set the local address of the link as the source IP address
to send neighbor requests. When no ipv6 ns-linklocal-src is executed, the
global IP address will be taken as the source address to send neighbor
requests.
ipv6 ns-linklocal-src
no ipv6 ns-linklocal-src
Default
configuration
Chapter 3 IPv6 Configuration Commands
Command Description
show ipv6
Show the interface information.
interface
The RA message is not sent on the IPv6 interface by
default.
Interface configuration mode.
This command suppresses the sending of the RA
message on an interface.
Ruijie(config-if)# ipv6 nd suppress-ra
Command Description
show ipv6
Show the interface information.
interface
The local address of the link is always used as the source
address to send neighbor requests.