Ruijie Networks RG-S2600E Series Cli Reference Manual page 80

S2600E/P CLI Reference Guide
Configuration Commands
Chapter 5 Network Connectivity Test Tool
From above result, it's clear to know that the gateways
passed by the packets sent to the host with an IP address
of 61.154.22.36 (gateways 1~6) and the spent time are
displayed. Such information is helpful for network analysis.
2. When some gateways in the network fail:
Ruijie# traceroute 202.108.37.42
< press Ctrl+C to break >
Tracing the route to 202.108.37.42
1 192.168.12.1
2 192.168.9.2
3 192.168.110.1
4 * * *
5 61.154.8.129
6 61.154.8.17
7 61.154.8.250
8 218.85.157.222
9 218.85.157.130
10 218.85.157.77
11 202.97.40.65
12 202.97.37.65
13 202.97.38.162
14 202.96.12.38
15 202.106.192.226 88 msec
16 202.106.192.174
17 210.74.176.158
18 202.108.37.42
The above result clearly shown that the gateways passed
by the packets sent to the host with an IP address of
202.108.37.42 (gateways 1~17) and the spent time are
displayed, and gateway 4 fails.
Ruijie# traceroute www.ietf.org
Translating "www.ietf.org"...[OK]
< press Ctrl+C to break >
Tracing the route to 64.170.98.32
1 192.168.217.1
2 10.10.25.1
3 10.10.24.1
4 10.10.30.1
5 218.5.3.254
6 61.154.8.49
7 202.109.204.210
8 202.97.41.69
9 202.97.34.65
10 202.97.57.222
11 219.141.130.122
0 msec 0 msec 0 msec
0 msec 4 msec 4 msec
16 msec 12 msec 16 msec
12 msec 28 msec 12 msec
8 msec 12 msec 16 msec
12 msec 12 msec 12 msec
12 msec 12 msec 12 msec
16 msec 16 msec 16 msec
16 msec 48 msec 16 msec
76 msec 24 msec 24 msec
32 msec 24 msec 24 msec
52 msec 52 msec 224 msec
84 msec 52 msec 52 msec
52 msec 52 msec
52 msec 52 msec 88 msec
100 msec 52 msec 84 msec
48 msec 48 msec 52 msec
0 msec 0 msec 0 msec
0 msec 0 msec 0 msec
0 msec 0 msec 0 msec
10 msec 0 msec 0 msec
0 msec 0 msec 0 msec
10 msec 0 msec 0 msec
0 msec 0 msec 0 msec
20 msec 10 msec 20 msec
40 msec 40 msec 50 msec
50 msec 40 msec 40 msec
40 msec 50 msec 40 msec