Ruijie Networks RG-S2600E Series Cli Reference Manual page 230

S2600E/P CLI Reference Guide
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
Platform
description
12.1.7 switchport dot1q-tunnel native vlan
Use this command to configure the default vlan id of dot1q-tunnel.
switchport dot1q-tunnel native vlan vid
no switchport dot1q-tunnel native vlan
Parameter
description
Chapter 12 QinQ Configuration Commands
Parameter
tagged
untagged
v_list
no
Allowed vlan 1，untagged.
Interface configuration mode.
Here is an example of configuring vlan 3-6 of dot1q-tunnel
port as allowed VLAN and outputting the frame with tag:
Ruijie(config)#interface gigabitEthernet 0/1
Ruijie(config-if)#switchport dot1q-tunnel allowed vlan
tagged 3-6
Ruijie(config)#end
Command
show interface
dot1q-tunnel
The software version must be RGOS10.3 and later.
Parameter
vid
no
Description
Tag-carried.
Not tag-carried.
vlan id list.
Remove the settings.
Description
-
Description
Configure default vlan id.
Configure default vlan as 1.