Ruijie Networks RG-S2600E Series Cli Reference Manual page 143

S2600E/P CLI Reference Guide Chapter 4 LACP Configuration Commands
Port Flags State
----------------------------------------------------------
---
Gi0/1 SA
0x3d
Gi0/2 SA
0x3d
Gi0/3 SA
0x3d
Partner information:
LACP port
Port Flags Priority
----------------------------------------------------------
--
Gi0/1 SA 61440
Gi0/2 SA 61440
Gi0/3 SA 61440
Field
Local information
Port
Flags
State
LACP Port Priority
Oper Key
Port Number
Port State
Priority Key
bndl 4096
bndl 4096
bndl 4096
Oper
Dev ID Key
00d0.f800.0002 0x3
00d0.f800.0002 0x3
00d0.f800.0002 0x3
Description
Show the
information.
Show the system port ID.
Show the port state flag: "S"
indicates that the LACP is
stable and in the state of
periodically
LACPPDU; "A" indicates that
the port is in the active
mode.
Show the port aggregation
information: "bndl" indicates
that the port is aggregated;
"Down" represents
disconnection
"susp" indicates that the port
is not aggregated.
Show the LACP port priority.
Show the port operation key.
Show the port number.
Show the flag bit for the
LACP port state.
Number State
0x3 0x1
0x3 0x2
0x3 0x3
Port Port
Number State
0x1 0x3d
0x2 0x3d
0x3 0x3d
local LACP
sending the
the
port state;