Ruijie Networks RG-S2600E Series Cli Reference Manual page 557

S2600E CLI Reference Guide
no form of the command to restore it to the default value.
dot1x timeout re-authperiod seconds
no dot1x timeout re-authperiod
Parameter
Parameter
description
seconds
Default 3600 seconds.
Command
mode Global configuration mode.
Usage Use show dot1x command to show the 802.1X
configuration.
guidelines
The following example sets the period of re-authentication
to 1000s:
Ruijie# configure terminal
Ruijie(config)# dot1x timeout re-authperiod 1000
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status:
Authentication mode
Authed User Number:
Re-authen Enabled:
Examples
Re-authen Period:
Quiet Timer Period:
Tx Timer Period:
Supplicant Timeout:
Server Timeout:
Re-authen Max:
Maximum Request:
Filter Non-RG Supp:
Client Oline Probe:
Eapol Tag Enable:
Authorization Mode:
Command
Related
commands
show dot1x
Chapter 4 802.1X Configuration Commands
Description
Period of authentication. The range is
from 0 to 65535 seconds.
Enabled
EAP-MD5
0
Disabled
1000 sec
1000 sec
3 sec
3 sec
5 sec
3 times
3 times
Disabled
Disabled
Disabled
Group Server
Description
Show the information about 802.1x.