Ruijie Networks RG-S2600E Series Cli Reference Manual page 91

S2600E/P CLI Reference Guide
Parameter
description
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
Description
1.1.11 line-detect
Use this command to detect the cable connection status.
line-detect
Command
mode
Usage
guidelines
Examples
Chapter 1 Interface Configuration Commands
Parameter Description
VLAN ID. Its range depends by
vlan-id
products.
Global configuration mode.
Use show interfaces or show interfaces vlan to display
the interface configurations.
Ruijie(config)# interface vlan 2
Ruijie(config-if)#
Command Description
Show the interface information.
show interfaces
-
Interface configuration mode.
This command is used to detect the line status and locate
the problem in case of a line failure, for example, the line is
torn down.
Ruijie(config)#interface gigabitEthernet 0/1
Ruijie(config-if-GigabitEthernet 0/1)#line-detect
Interface : GigabitEthernet 0/1
start cable-diagnoses,please wait...
cable-daignoses end!this is result:
4 pairs