Ruijie Networks RG-S2600E Series Cli Reference Manual page 381

S2600E CLI Reference Guide
Usage
guidelines
Examples
3.3 Showing Configuration Example Commands
3.3.1 ntp help
Use this command to show the typical configuration of NTP modules.
ntp help
Parameter
description
Default
Command
mode
Usage
guidelines
Chapter 3 NTP Configuration Commands
If the NTP service of the system is enabled, show current
NTP information. This command will not print any
information before the synchronization server is added for
the first time.
The example below shows the NTP information of current
system.
Ruijie(config)#show ntp status
N/A.
N/A
Privileged mode.
For current operation of the CLI, the configuration is
realized by executing the every single command. As for
the configuration and deployment of a specific functional
module, current CLI presentation lacks some replicable
typical configuration examples, therefore, users can only
ask for the configuration help by other means(such as
reading related manuals and going to our frontline
engineers for help)
Displaying the typical configurations of each security
module on the CLI provides the corresponding help about
the quick basic deployment of certain security function for
users, increasing the usability of CLI.