Ruijie Networks RG-S2600E Series Cli Reference Manual page 332

S2600E/P CLI Reference Guide
Examples
Platform description
8.1.6 ftp-server username
Use this command to set the login username for the FTP server. Use the no
form of this command to cancel the username configuration.
ftp-server username username
no ftp-server username
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Chapter 8 FTP Server Configuration Commands
The session idle time refers to the time for the FTP
session between two FTP operations.
The following example shows how to set the session idle
timeout as 5m:
Ruijie(config)# ftp-server timeout 5
The following example shows how to restore the session
idle timeout to the default value(30m):
Ruijie(config)# no ftp-server timeout
N/A
Parameter
username
By default, no username is set.
Global configuration mode.
Use this command to set the login username for the FTP
server. To log in to the FTP server, the correct username
and password shall be provided.
The maximum length of the username is 64 characters
and the spaces are not allowed in the middle of the
username. The username consists of letters, semiangle
number and semiangle mark. One username can be
configured for the FTP server at most.
Caution
The anonymous user login is not supported on the FTP
Description
Set the login username.