S2600E CLI Reference Guide
Default
5 minutes.
Command
mode
Global configuration mode.
If the AAA security service is not enabled, the accounting
Usage
update function cannot be used. This command is used to
guidelines
set the accounting interval if the AAA security service has
been enabled.
The following example demonstrates how to set the
interval of accounting update to 1 minute.
Examples
Ruijie(config)# aaa new-model
Ruijie(config)# aaa accounting update
Ruijie(config)# aaa accounting update periodic 1
Command
aaa new-model
Related
aaa
commands
accounting
network
1.3.6
accounting commands
Use this command to apply the accounting command list to the specified terminal lines. The
no form of this command is used to disable the accounting function.
accounting commands level {default | list-name}
no accounting commands level
Parameter
level
Parameter
description
default
list-name
Default
Disabled.
Chapter 1 AAA Configuration Commands
Description
Enable the AAA security service.
Define a network accounting method
list.
Description
The accounting command level, 0-15. The
message shall be recorded before determing
which command level is executed.
Use
the
default
commands.
Use a defined command accouting method list.
method
of
accouting
Need help?
Do you have a question about the RG-S2600E Series and is the answer not in the manual?