Ruijie Networks RG-S2600E Series Cli Reference Manual page 937

S2600E CLI Reference Guide
no rate-limit
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
2.2.4 class maps
Use the following command to creat an ACL:
ip access-list {extended | standard} { acl-id | acl-name }
Or mac access-list extended {acl-id | acl-name}
Or expert access-list extended {acl-id | acl-name}
Or ipv6 access-list extended acl-name
Or access-list acl-id series commands (refer to the related ACL chapters )
Use the following command to create a class map and enter the class map
configuration mode:
[no] class-map class-map-name
Use the following command to create the matching standard of class map:
[no] match access-group acl-name| acl-id
Chapter 2 QoS Configuration Command
Parameter Description
input Input rate limit
ouput Ouput rate limit
bps Limited bandwidth per second
burst-size The dscp-list range varies with products
no Restore it to the default value.
N/A
Interface configuration mode.
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)# rate-limit input 1000000 4096
Command Description
show mls qos -
interface