Ruijie Networks RG-S2600E Series Cli Reference Manual page 837

S2600E CLI Reference Guide
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
15.7.12 nfpp define name policy
Use this command to set the local rate-limit threshold and the attack threshold.
nfpp define
attack-threshold-pps
Parameter
description
Chapter 15 NFPP Configuration Commands
name
permanent
By default, the local isolate period is not configured. The
global isolate period is used.
Interface configuration mode.
N/A
Ruijie(config)# interface G 0/1
Ruijie(config-if)# nfpp define tcp isolate-period 180
Command
isolate-period
show nfpp define
summary
name policy {per-src-ip
Parameter
per-src-ip
per-port
rate-limit-pps
Name of the user-defined anti-attack
type.
Permanent isolation.
Description
Set the global isolate period.
Show the configurations.
| per-src-mac
Description
Set the attack threshold for each
source IP address.
Set the attack threshold for each
port.
Set the rate-limit threshold with the
valid range of [1, 9999].
| per-port} rate-limit-pps