Ruijie Networks RG-S2600E Series Cli Reference Manual page 492

S2600E CLI Reference Guide
Parameter
Parameter
default
description
list-name
Default Disabled.
Command
Line configuration mode.
mode
Once the default execauthorization method list has been
configured, it is applied to all terminals automatically. Once
the non-default command authorization method list has
Usage been configured, it is applied to the line instead of the
guidelines default method list. If you attempt to apply a undefined
method list, a warning message will prompt that the exec
authorization in this line is ineffective tilll the authorization
method list is defined.
The following example configures the exec authorization
method list with name exec-1, uses the RADIUS server. If
the security server does not response, it does not perform
authorization.
command is applied to VTY 0-4 lines:
Examples
Ruijie(config)# aaa authorization exec exec-1 group
radius none
Ruijie(config)# line vty 0 4
Ruijie(config-line)# authorization exec exec-1
Command
aaa new-model
Related
aaa
commands
authorization
commands
Chapter 1 AAA Configuration Commands
Description
Use the default method of Exec authorization.
Apply a defined
authorization.
After configuration,
Description
Enable the AAA security service.
Define the method list of AAA Exec
authorization.
method list of Exec
the authorization