Ruijie Networks RG-S2600E Series Cli Reference Manual page 422

S2600E/P CLI Reference Guide
Default
Command
mode
Usage
guidelines
Examples
Related
commands
1.1.8 ip i gmp snooping mrouter learn pim-dvmrp
To configure a device to listen to the IGMP Query/Dvmrp or PIM Help
dynamically in order to automatically identify a r
igmp snooping mrouter learn command in the glo
no form of this command is used to disable the dyna
ip igmp snooping mrouter learn pim-dvmrp
no ip igmp snooping mrouter learn pim-dvmrp
Default
Command
mode
Usage
guidelines
Chapter 1 IGMP Snooping Commands
4294967294.
N/A.
Interface configuration mode.
If a maximum number of multicast groups are configured,
the device will no longer receive and process IGMP Report
messages when the number of multicast groups on this
interface is beyond the range.
The following example shows how to configure
maximum number of multicast groups to 100 on the
megabit inte rface 0/1:
Ruijie(config)# interface fastEthernet 0/1
Ruijie(co nfig-if) # ip igmp snooping max-group 100
Command Description
Filter multicast groups that pass through
ip igmp
snooping filter a port.
Enabled
Global configuration mode.
Routing interface is a port through which a multicast device
is directly connected to a multicast neighbouring device
By default, the dynamic routing interface learning function
is enabled. You can use the no form of this command to
outing interface, execute the ip
bal configuration mode. The
mic learning.
the
packets