Ruijie Networks RG-S2600E Series Cli Reference Manual page 57

S2600E/P CLI Reference Guide
Related
commands
Version
description
3.1.3
Use this command to set the authentication retry times of the SSH Server. Use
the no form of this command to restore it to the default setting.
ip ssh authentication-retries retry times
no ip ssh authentication-retries
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Chapter 3 SSH Configuration Commands
Command
show ip ssh
crypto
generate
{rsa|dsa}
The software version must be RGOS10.1 and later.
ip ssh
authenticatio
n-retries
Parameter
retry times
The default authentication retry times are 3.
Global configuration mode.
User authentication is considered failed if authentication is
not successful when the configured authentication retry
times on the SSH server is exceeded. Use the show ip
ssh command to view the configuration of the SSH Server.
The following example sets the authentication retry times
to 2:
Ruijie# configure terminal
Ruijie(config)# ip ssh authentication-retries 2
Description
Show the current status of the SSH
Server.
key
Generate DSA and RSA keys.
Description
Authentication retry times