Ruijie Networks RG-S2600E Series Cli Reference Manual page 716

S2600E CLI Reference Guide
Related
commands
10.1.2 ip dhcp snooping vlan
Use this command to enable DHCP snooping for the specific VLAN. The no form of this
command will disable the DHCP snooping function for the corresponding VLAN.
[no] ip dhcp snooping vlan {vlan-rng | {vlan-min [vlan-max]}}
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Chapter 10 DHCP Snooping Configuration Commands
DHCP snooping database write-delay time: 0 seconds
DHCP snooping option 82 status: ENABLE
DHCP Snooping Support Bootp bind status: ENABLE
Interface Trusted
------------------------
Command
show ip dhcp
snooping
ip dhcp snooping
vlan
Parameter
vlan-rng
vlan-min
vlan-max
By default, once the DHCP Snooping is enabled globally, it
takes effect for all VLANs.
Global configuration mode.
Use this command to configure effective DHCP snooping
VLAN by character string.
The following example enables the DHCP snooping
function in VLAN1000.
Ruijie# configure terminal
Rate limit (pps)
------- ---------------
Description
View the configuration information of
DHCP snooping.
Configure DHCP snooping enabled
VLAN.
Description
VLAN range of effective DHCP
snooping.
Minimum VLAN
DHCP snooping.
Maximum VLAN
DHCP snooping.
of effective
of effective