Ruijie Networks RG-S2600E Series Cli Reference Manual page 797

S2600E CLI Reference Guide
Related
commands
15.3.5 dhcp-guard
monitored-host-limit
Use this command to set the maxmum monitored host number.
dhcp-guard monitored-host-limit number
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Chapter 15 NFPP Configuration Commands
Command
show nfpp
dhcp-guard summary
show nfpp
dhcp-guard hosts
clear nfpp dhcp-guard
hosts
Parameter Description
number
The
number.
1-4294967295.
1000
NFPP configuration mode
If the monitored host number has reached the default
1000, the administrator shall set the max-number smaller
than 1000 and it will prompt the message that
value that you configured is smaller than current
monitored hosts 1000, please clear a part of monitored
to remind the administrator of the invalid
hosts.
configuration and removing the monitored hosts.
When the maximum monitored host number has been
exceeded, it prompts
NFPP_ARP_GUARD-4-SESSION_LIMIT: Attempt to exceed limit
of 1000 monitored hosts.to
Ruijie(config)# nfpp
Ruijie(config-nfpp)#
200
Description
Show the configurations.
Show the monitored host list.
Clear the isolated host.
maximum monitored
The valid
the message
remind the administrator.
dhcp-guard monitored-host-limit
host
range is
%ERROR：The
that
%