Ruijie Networks RG-S2600E Series Cli Reference Manual page 964

S2600E CLI Reference Guide
1.2.2 show interfaces [interface-id] switchport backup [detail]
Use this command to show the dual link backup information on the interfaces.
show interfaces [interface-id] switchport backup [detail]
Parameter
description
Default
Command
mode
Examples
1.2.3 show mac-address-table update group detail
Use this command to show the mac-address-table update group information.
show mac-address-table update group detail
Chapter 1 REUP Configuration Commands
Link State Group:2 Status: Disabled, Down
Upstream Interfaces :
Downstream Interfaces :
(Up):Interface up (Dwn):Interface Down (Dis):Interface
disabled
Parameter Description
interface-id The interface id of the dual link backup.
detail Show the detailed information about the
dual link backup.
Show the dual link backup information on all interfaces.
Privileged EXEC mode.
Ruijie # show interfaces switchport backup detail
Switch Backup Interface Pairs:
Active Interface
----------------------------------------------------
Gi0/23
Up/Backup Standby
Interface Pair : Gi0/23, Gi0/24
Preemption Mode : Off
Preemption Delay : 35 seconds
Bandwidth : Gi0/23(1000 Mbits), Gi0/24(1000 Mbits)
Backup Interface
Gi0/24
State
Active