Show Arp Counter; Show Ip Interface - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E/P CLI Reference Guide
Related
commands
Platform
description
1.3.2

show arp counter

Use this command to show the number of ARP entries in the ARP cache table.
show arp counter
Parameter
description
Command
mode
Examples
1.3.3

show ip interface

Use this command to show the IP status information of an interface. The
command format is as follows:
show ip interface [ interface-type interface-number | brief]
Parameter
description
Chapter 1 IP Address Configuration Commands
Command Description
Add a static mapping record to the ARP
arp
cache table.
-
N/A.
Any.
The following is the output result of the show arp counter
command:
Ruijie# show arp counter
The Arp Entry counter:0
The Unresolve Arp Entry:0
The meaning of each field in the ARP cache table is
described in Table 1.
Parameter Description
interface-type Specify interface type.
interface-number Specify interface number.
Show the brief configurations about
the
brief
(including the interface primary ip,
secondary ip and interface status)
IP of the layer-3 interface