Ruijie Networks RG-S2600E Series Cli Reference Manual page 591

S2600E CLI Reference Guide
4.6.3 show dot1x auto-req
Use this command to show the configuration information of automatic 802.1x authentication.
show dot1x auto-req
Parameter
description N/A.
N/A.
Default
Command
mode Privileged mode.
Usage
guidelines N/A.
The following example shows the information about
automatic 802.1x authentication:
Ruijie# show dot1x auto-req
Auto-Req: Disabled
Examples
User-Detect : Enabled
Packet-Num : 0
Req-Interval: 30 Seconds
Ruijie#
Related Command
commands
dot1x auth-mode
dot1x max-req
dot1x
port-control auto
dot1x
reauth-max
dot1x
re-authentication
dot1x timeout
quiet-period
dot1x timeout
re-authperiod
Chapter 4 802.1X Configuration Commands
Description
Set the 802.1x authentication mode.
Set the maximum number of
authentication request
retransmissions.
Set the port to participate in
authentication.
Set the maximum number of the
supplicant re-authentications.
Set the re-authentication attribute.
Set the time the device waits before
reauthentication.
Set the re-authentication period for the
supplicant.